Negative and Positive Caster Effects

Caster refers to the angle of the steering axis on a vehicle’s wheel from the straight line of its vertical axis. This is a wheel that gets steered on a vehicle, such as a bicycle, car, or motorcycle. The angle is measured by the angular space between the vertical and the pivot line, which is the line that runs from the lower ball joint to the upper ball joint. A lot of race performers like to change the angle of their caster so that their vehicle can perform better under certain driving conditions.

Caster effects don’t just exist on cars. They exist on anything that has wheels on the bottom of it. For example, pay attention to the wheels on the shopping cart at your local supermarket. Most likely, these wheels will have a positive caster because they were made to help you keep the cart straight as you push it. That is the power of the caster effects.

Positive Caster Effects

When there is a positive caster set, the steering axis slants in front of the vertical axis toward the rear of the vehicle.  This means the coil spring over the shock, or coil over, would be going toward the rear while you’re driving. The driving effect of the positive caster can be noticed as you’re driving forward. Due to the vast align torque, the steering wheel will straighten out and make your vehicle more stable as you simply drive straight. If you increase the degree of the positive caster angle too much, it will create more heaviness in the steering.

Fortunately, most modern vehicles have power steering abilities which reduce the heaviness felt in the steering wheel whenever you have a positive caster on your wheels. So, just make sure the vehicle that you want to purchase has a good power steering system. Then you will find the positive caster setting to be very stable and comfortable as you’re driving on a flat road.

Negative Caster Effects

When there is a negative caster set, the steering axis slants in back of the vertical axis toward the front of the vehicle. A lot of older cars have negative caster settings on their wheels. The main reason that negative casters had been used can be attributed to the classic technology of tires and chasses back in those days. Also, there was no power steering back then, so automakers had to figure out a way to make the steering wheel feel lighter for the drivers. The negative caster set up was the only way they could pull this off.

When you look at the way newer cars are made, their internal structure and chassis cannot support a negative caster. Why would they? Power steering has revolutionized the automobile industry and has allowed drivers to have a much safer and stable driving experience. Besides, a negative caster had trouble with stability and keeping on a straight path because the steering wheel often becomes too light and it is easy to jerk around. However, some drivers like it this way which is why they still choose to have negative casters on their vehicle.

Read also: 7 Common Causes of a Car Not Picking Up Speed

Important Tips

If you try to modify the caster settings on your vehicle, make sure you keep the angular degrees of the casters completely symmetrical with one another. If you were to make the mistake of miscalculating the angles of the casters on various wheels of your vehicle, then you will find that the car will start pulling more toward one side versus the other side. The side which doesn’t have much of a caster angle will be the side in which the car pulls toward. If you don’t trust yourself to do this properly, then have a professional change the caster angles for you.

You May Also Like

Leave a Reply

Your email address will not be published. Required fields are marked *