Are Driving a Car With Wheel Spacers Safe?
Wheel spacers can be used when you want to install customized wheels, especially wheels that are not positioned properly for your vehicle. Wheel spacers basically provide additional space between the wheels and the wheel hubs. This helps to correct the positioning of the wheels that you want to install by adjusting the offset. In addition, the extra space created allows your wheels to be more stable as they rotate. You’ll feel this stabilization the most when you go to make turns around corners.
Overall, wheel spacers are purchased more for cosmetic reasons because people love the way in which the wheels get pushed out by them. However, there is also a concern that wheel spacers make driving more unsafe. You’ll find a lot of controversy about this topic between various car enthusiasts and auto mechanics.
Generally, wheel spacers are safe if they’re installed properly. It is not recommended that you try installing them yourself, even if you think you’re a good mechanic. You must use a professional and licensed mechanic who has experience installing wheel spacers successfully. With that being said, you should only get wheel spacers installed if you think you really need them. Most people don’t need wheel spacers, so it matters how badly you care about their cosmetic appeal.
Let’s go over some of the safety concerns regarding wheel spacers. Then you can decide for yourself whether they’re worth the risk or not. But you should find that these concerns are addressable and easy to solve.
- 5 Steps to Clean Catalytic Converter by Yourself
- Top 10 Best Engine Coolants For Your Car
- Top 10 Best Penetrating Oils for Loosening Rusted Bolts
You cannot use the same wheel studs or wheel bolts when you go to install new wheel spacers. You need to get longer bolts and studs to ensure that you remain safe. Otherwise, short studs and bolts will put you at risk after wheel spacers are installed. Also, you need to factor in the least amount of thread that is necessary. The best thread amount will be one that matches the length of the bolt’s diameter.
Most importantly, make sure all your bolts and nuts are tight and secure. You don’t want to run the risk of having loose nuts and bolts because that will increase the chances of an accident. Keep the components torqued fully and you should have no problems. If you don’t understand how to do any of this, then it is even more crucial that you have a mechanic do it for you.
So, in answer to the question, wheel spacers are safe if you take the necessary safety precautions. This means making sure the wheel spacer, wheel, and wheel hub are secured enough to where they don’t flex. When people experience wheel stud problems, it usually has to do with loose lug nuts because of a lack in clamp force. On the other hand, don’t overtighten your lug nuts either because that will stretch the stud too far. Find a suitable balance in the level of tightness and the stud will remain strong. This keeps the wheel spacers safe.
The common myth is that wheel spacers disrupt the physics of the wheels and wheel hubs. This is simply not true because the physics are not affected by the spacers. After all, the center of the hub is not what secures the spacer onto it. The wheel spacer’s lip does not experience any load either. It only helps you with the wheel installation.
While it is important to use long wheel studs for your wheel spacer, you don’t need to have longer wheel studs installed if you choose bigger wheel spacers. Just choose studs that are longer than your standard factory studs. Ask your local mechanic to recommend some if you’re still confused.