When it comes to automotive suspension systems, double wishbone and MacPherson suspension are two of the most common suspension architectures. Both systems have their advantages and disadvantages. Understanding the pros and cons of each can help consumers and car enthusiasts make informed decisions when they purchase a vehicle, depending on their use case. Double Wishbone … Read more
The twisting force produced by the engine is called torque. The job of the drive shaft is to transmit this torque to the wheels of the vehicle. Most vehicles are front-wheel drive, so the torque would be transmitted to the two front wheels with what’s called a half-shaft. But other vehicles have what’s called a … Read more
There are many moving parts in your vehicle. As the car drives along, it’s constantly being jolted by the impact of the road. Why then don’t we notice all the knocks and noise? That’s thanks to your suspension. The suspension helps to insulate you from vibrations and sound and strut mounts play a big role … Read more
The suspension system is basically the series of parts which support the vehicle as it moves on the road. These are components which give your vehicle the ability to make turns as you rotate the steering wheel and to absorb shocks when you drive over bumps or potholes. In modern-day vehicles, there are literally hundreds … Read more
Cars are equipped with front wheel bearings and rear wheel bearings. In fact, any machine with moving wheels is likely going to have wheel bearings. In vehicles, wheel bearings reduce the amount of friction in the spinning wheels. Otherwise, if you were to have a lot of friction, there would be a lot of heat … Read more
What is Camber? When the word “camber” is used in relation to automobiles, it refers to the angle of a vehicle’s wheels and their vertical position as they sit on the surface of the ground or road. If the wheels have a negative camber, it means the tops of the front wheels are inclining to … Read more
CV joints are the constant-velocity joints of your vehicle. They are responsible for transferring power from your vehicle’s transmission to its wheels without causing hardly any friction. Because of this, the driver can turn the steering wheel and the wheels are able to respond smoothly to their demands. CV joints are essential components in virtually … Read more
What is Caster? Caster refers to the angle of the steering axis on a vehicle’s wheel from the straight line of its vertical axis. This is a wheel that gets steered on a vehicle, such as a bicycle, car, or motorcycle. The angle is measured by the angular space between the vertical and the pivot … Read more
The lower ball joint is what attaches the steering knuckle and control arm together. There are two pieces which make up the lower ball joint; a socket and ball. These pieces are inside of a rubber boot that is filled with lubricant. Basically, the lower ball joint allows the wheels and tires to be connected … Read more
Coil springs are the major component of modern suspension systems that keep your vehicle “suspended” off the ground. These springs absorb impact from bumps in the road by compressing and expanding. How Do Coil Spring Suspensions Work? The compression and rebound of the coil spring, coupled with the damping applied by the shock absorbers, work to keep … Read more